TR.32.14 Enclosed Zone Loads

This command is used to specify enclosed zone loads.

General Format

LOAD n ( LOADTYPE type ) ( TITLE title )

ENCLOSED ZONE LOAD

zone-name LZ f1

zone-name LZ f2

Parameter	Description
LOAD n	Any unique integer number (up to five digits) to identify the load case. This number need not be sequential with the previous load number.
zone-name	The enclosed zone definition name.
LZ	The load is applied along the local z axis, normal to the plane of the enclosed zone. Note: Enclosed zone loads may only act in the local z axis. Any other direction specifier used here will result in a program error.
f1, f2	The intensity of the uniformly distributed area load on the enclosed zone.

LOAD 1 LOADTYPE NONE TITLE ENCLOSED ZONE
ENCLOSED ZONE LOAD
FLOOR1 LZ 5
FLOOR2 LZ -2

Parent topic: TR.32 Loading Specifications

Related tasks	Related reference
M. To define an enclosed zone M. To add an enclosed zone load	TR.31.10 Defining Enclosed Zones Enclosed Zone tab Add New Enclosed Zone Definitions dialog